Description
| Battery Type |
AGM |
Nominal Voltage & Rated Capacity |
12V 55Ah |
| Battery Cell Composition |
Sealed Lead Acid |
Self-discharge Rate(77℉/25℃) |
3%/month |
| Cycle Use Voltage |
14.4V - 14.7V |
Float Charge Voltage |
13.5V - 13.8V |
| Maximum Charging Current |
16.5A |
Maximum Discharging Current |
550A(5 seconds) |
| Standard Operation Temperature |
25°C±3°C / 77°F±5°F |
Product Dimensions |
228x138x208 mm / 8.97x5.43x8.19 in |
| Product Weight |
16.9 kg / 37.2 lbs |
Warranty |
2-year |
Experience Unbeatable Power with TL1255/FP12550 Sealed Lead Acid Battery!
Are you in search of a reliable and high-performance battery to power up your devices? Look no further! Introducing our top-of-the-line TL1255/FP12550 Sealed Lead Acid Rechargeable Battery, delivering unmatched power and versatility.
Dependable Performance, Quality Assured: Each parcel includes 1x Battery with screws for easy installation - wire harness or mounting not included. Whether you receive TL1255 or FP12550, rest assured that both are of the same superior quality, manufactured in different batches for consistent excellence.
Empowering a Wide Range of Applications: Experience true versatility with our battery's incredible capabilities. From Solar Panel Wind Energy Storage to Electric Vehicles, Golf Carts, Industrial Equipment, and more, it's the ideal power source for your mobile scooter, wheelchair, and portable tools. Whether you need power for leisure activities or reliable backup during camping trips, this battery has got you covered.
Perfect Fit for Various Devices: Our battery is a perfect match for John Deere Lawn Tractor-Riding Mower 108, Bruno PWC 23002310 U1 Wheelchair, and Pride Mobility Jazzy Select 6, among others. It also provides the essential power required for Trolling Motors, Electric Wheelchairs, and Pride BATLIQ1018. Count on seamless performance for your mobility needs!
Unleash the Power - Trust in Weize, Your Reliable Energy Partner.
Sealed Battery & Safe Charging
- Manufactured with thick absorbent glass mat (AGM) separators and advanced valve-regulated technology, the battery is maintenance-free, leak-proof, and gas-free.
- Weize SLA batteries are utilized in a wide variety of applications including; Solar Panel Off-Grid Applications, Back-up Sump Pump, Kayak Trolling Motor, RV VAN Camping Trip, Travel Trailer, Golf Carts, Consumer Electronics, Electric Vehicles, Hunting, Fishfinder, Lawn and Garden Tools, Medical Mobility, Portable Tools, Toys and Hobby, Access Control Devices, Emergency Lighting, Security and more.
The 12V 55AH Solar Deep Cycle SLA Battery uses AGM technology. It can be used for both cycle and standby applications. The sealed, valve-regulated design allows for superior performance in any orientation, even in harsh conditions, without any leaking or maintenance.
SLA batteries have a low self-discharge rate - about 40% per year or 3.3% per month. These batteries are able to be stored without charging for up to 5-6 months when at full capacity, but doing so is not recommended. At least every 2-3 months you should top charge them. In order to prolong their shelf life, SLA batteries should be stored and maintained properly.
Best Practices
- Store batteries in a cool, dry place (optimally 75 degrees Fahrenheit / 23 degrees Celsius or less)
- Periodical top charging of the batteries is recommended
- Store batteries in a fully charged state
Our batteries can be used in various types of:
- Access Control Systems
- Home Alarm Systems
- Burglar Alarm Systems
- Security Systems
- Electric scooters and bikes
- Electric wheelchairs
- Ride-on Toys
- Golf Carts
Connecting batteries
NOTE: The maximum number that can be connected in series is 4. In parallel, there are no limitations.
IN SERIES
By connecting the batteries in series you are doubling the voltage and maintaining the same capacity (amp hours). Connect the positive terminal of the first battery to the negative terminal of the second one. From the two free terminals connect the positive to the power lead on your device, and the negative to the ground connection of your application.
PARALLEL
By connecting the batteries in parallel you are doubling the capacity (amp hours) and maintaining the same voltage. Connect the positive terminal of the second battery to the positive terminal of the first battery. Do the same with the negative terminals. Connect your application to the positive and negative terminals of the first battery.
IMPORTANT INFORMATION BEFORE YOU BUY
In order to find the best replacement for your original battery you need to compare the physical dimensions, Volts, and Amp power of your original model to our battery. Besides physical dimensions, you also need to check battery terminals, which are the metal connectors on top of the battery. To determine what terminal your battery has, you will need to look at their form and determine if they have a flat connector, nut, bolt, or wires, and then measure their sizes.
